It’s very annoying that the USB keeps disconnecting and reconnecting, especially when you need to use the port right away. There are, thankfully, a few good ways to handle this problem. By using BLR Tools, you’ll be given a few good choices.

USB Keeps Disconnecting and Reconnecting Windows 10/8/7

It’s possible that the USB hub randomly disconnects and reconnects when a USB device is connected to the computer, as seen in the following online case:

My gaming PC running Windows 7 was recently upgraded to Windows 10, and ever since then, my USB devices have been giving me trouble. All of my USB devices disconnect and reconnect about every five minutes. Is it possible to fix this USB bug?

The same applies to certain other issues, such as an Android phone that keeps connecting and disconnecting from USB, USB C disconnecting, and an unidentified USB device that keeps connecting and disconnecting. Usually, a hardware or driver problem could be the cause.

Also, if Windows 10 keeps disconnecting and reconnecting the USB ports on your computer, you should first make sure that they work on another computer. As long as the USB device itself works, it’s possible that nothing is wrong.

You can also connect a working USB drive to the PC to test the USB connection. USB disconnects again after a while, suggesting Windows 10/8/7 hardware or driver issues.

Now, let’s look at some troubleshooting tips that will help you stop Windows 10/8/7 USB connections from dropping after a few seconds.

How to Resolve USB Port Connectivity Issues on Windows 10 to Resolve USB Keeps Disconnecting and Reconnecting

Here, we’ll explore four effective recommendations:

• It is recommended to reinstall the driver for the Universal Serial Bus Controller.
• Disable the power-saving feature of the USB driver.
• To install the Universal Serial Bus Controller driver, please switch to compatibility mode.
• Use the Devices and Hardware Troubleshooter for assistance.

We will talk about them one by one in the sections that follow.

Solution 1: Reinstall the Universal Serial Bus Controllers Driver

Some USB devices on Windows 10 may disconnect and reconnect randomly. This could be because of a problem with the drivers. If you’re having trouble with a driver, you can try reinstalling the USB or Universal Serial Bus controller driver through Device Manager.

To ensure the successful completion of this task, strict adherence to the subsequent instructions is imperative:

Step 1: Press Windows + X simultaneously. Click M to open Device Manager.

Step 2: Find Universal Serial Bus Controllers in Device Manager. Expand to continue. Find your USB driver listing next.

In most cases, there are two different situations:

• If it is a standard USB drive, it will be recognized as a USB Massive Storage Device.
• The USB 3.0 Extensible Host Controller might help Windows 10/8/7 users who have trouble connecting to USB 3.0 devices.

Consider the USB 3.0 device as an example.

Simply uninstall the USB 3.0 extensible host controller.

When the uninstallation process is complete, reboot your computer to allow Windows to reinstall the drivers automatically.

Check if the USB ports keep disconnecting and reconnecting. Look for this behaviour if they do. Restart the device. Microsoft fixed all Windows 10 issues.

Solution 2: Disable power-saving

Powering down prevents USB device disconnections and reconnections, users found. Not all. Many benefit from this solution. If the first method fails, try another.

Allow us to explain this solution step-by-step:

Step 1: Find USB controllers in Device Manager. You can access these controllers after finding the option.

Step 2: To access the properties, simply right-click on the Standard USB 3.0 extensible host controller option and select Properties from the pop-out list. Now go to the section called “Power Management.” Next, uncheck the box that lets the computer turn this device off to save power. Then, click OK to make sure the change was made.

If you don’t use a USB device for a certain amount of time, it won’t turn off while the computer is running.

Solution 3: Reinstall the Universal Serial Bus Controller Driver in Compatibility Mode.

If you are experiencing issues with an external hard drive repeatedly disconnecting and reconnecting in Windows 10, it is recommended to use the OEM driver for resolution. Maybe the driver was functioning properly in the previous version, but it seems to have stopped working after an update. Next, it will be necessary to reinstall it in compatibility mode.

Keep in mind that this solution is specifically designed for external hard drives and may not be applicable to other USB devices.

Step 1: Obtain the most up-to-date version of the Universal Serial Bus Controller Driver from the manufacturer’s official website. Please download the appropriate driver based on your specific needs.

Step 2: Once the download has finished, you can find the setup file in the specified folder. To access more information, simply right-click on it and choose Properties from the menu that appears.

Step 3: Navigate to the Compatibility tab. Next, select the option to run the programme in compatibility mode and choose an older version of Windows, such as Windows 7. It is important to ensure that the driver functions properly with the chosen operating system. Finally, click on the Apply and OK buttons in sequence to save the change.

Once you have completed these three steps, it is necessary to restart your computer in order to determine if the problem of the USB keeps disconnecting and reconnecting has been resolved.

Solution 4: Launch the Devices and Hardware Troubleshooter

Hardware issues can also cause USB devices to disconnect and reconnect to Windows 10/8/7. Use the Hardware and Devices Troubleshooter to fix the hardware or device.

This automated troubleshooter easily identifies and resolves issues.

Step 1: Type “troubleshooting” and press Enter. After that, choose the top search result.

Step 2: Go straight to Troubleshoot computer issues. Select Configure a device from Hardware and Sound.

Step 3: Open the troubleshooter. Choose whether to automatically apply repairs based on your needs. Click Next to continue.

Step 4: Troubleshooter efficiently scans and fixes issues. Allow automatic repairs and problem resolution. If not, a scan report appears. Select the issues you want to address and click Next.

Finally, it is necessary to restart the computer and verify if the USB connection is lost after a short period of time.

Typically, these four solutions can effectively resolve the issue of USB disconnection.

Nevertheless, it is possible that you may encounter difficulties in accessing the USB drive once you have resolved the problem of the USB hub repeatedly disconnecting and reconnecting. It may be necessary to restore the drive to its original state in this situation.

It is important to be aware that this format will erase all files on the target USB drive. If you have important files on that drive, it would be wise to use top-notch data recovery software to proactively restore the data.

Are you in need of assistance with recovering data from a USB drive that is currently inaccessible? Continue reading to find a practical solution.

Fix the USB Keeps Disconnecting and Reconnecting Issue and Recover Files

If you need to recover lost data from a USB drive, you should try the BLR Data Recovery Tool.

This data recovery tool is skillfully designed to effectively recover lost and deleted files in a range of situations. Regardless of the condition of your storage drive, this software is capable of recovering your crucial files.

It is recommended to initially test the free edition of this software to scan the data on the lost USB drive and determine if it can locate the required files.

Then, you can refer to this guide to effectively utilize the software and scan the target USB drive for file recovery.

1. Download and install software on your computer.
2. Use a USB cable to secure your USB drive to your computer.
3. Launch software.
4. Our software automatically displays the drive in Logical Drives. Hover over your USB drive and click “Scan” to locate it.
5. The software initiates the scanning process on the chosen USB drive. The process will take some time. It is advisable to wait until the entire process is complete. Next, a prompt appears, allowing you to select the number of partitions to be scanned by the software. Please click OK to close the current interface and proceed to the scan result interface.
6. The software arranges files by path. Files can be found many ways. File display formats can be changed with the software. If you remember the file name, use the search function.
7. If you are uncertain about the file you wish to recover, you can preview it by double-clicking. The data recovery software known as BLR has the capability to preview a wide variety of file types.
8. If you’re interested in utilizing this software to recover your files from an inaccessible USB drive, you have the option to upgrade to the full edition. Once you have completed the necessary steps, you can choose the files you require, click on the Save button, and designate a suitable location to store your selected items. Always remember to avoid saving them to a USB drive that is not accessible.

Set the Inaccessible USB to Normal

Once you have the data recovered from the USB drive that won’t work, you can format it to make it work normally again.

There really is more than one way to set up a USB drive. You can set it up in File Explorer or Disc Management. You can also do that job with the Command Prompt.

The Final Say

In this article, we present four effective methods for resolving the USB keeps disconnecting problem. There is typically a method that can assist you.

If you are unable to access the USB drive even after resolving the USB keeps disconnecting and reconnecting issue, you can use the BLR Data Recovery Tool to retrieve crucial files and resolve issues with the drive.

There is a chance that you might encounter unexpected difficulties when using the solutions outlined in this post to resolve the issue of USB disconnection. If you have any questions or need assistance, you can contact us through email at support@blrtools.com or by leaving a comment. We are here to help. We are available to provide you with assistance. Please feel free to share your thoughts and recommendations in this space.