Summary: USB flash drives become corrupt for several causes, putting your data at danger. Understanding and fixing the issues might help you recover corrupt USB flash drive data and folders from a faulty or unresponsive USB flash device. For complete data recovery, use software.

USB flash drives store all data inside their memory, like hard drives. When needed, the OS may get this info. An incorrectly unmounted USB device from the port might damage data and make it unreachable. Invalid data in the MBR, PBR, or USB drive directory structure may also damage stored data.

There are additional reasons your USB may be faulty or sluggish. This might be logical or physical corruption. damaged stems and connections, dead drives (no power supply), damaged circuit or NAND gate, not recognized, RAW, need to format, not accessible, and dead drives are frequent physical corruption concerns.

How to Recover Inaccessible USB Drive Data?

To recover data from an inaccessible USB or Flash drive, first determine what caused the difficulty when reading it.

The following may cause USB corruption or inaccessibility:

• Problems Logically
• Physical Issues

USB File Recovery from Logical Issues

USB drive logical/software faults are easy to solve. You must fix the file structure to utilize the USB flash drive again to recover corrupt USB flash drive data.

This is how Windows scans for logical issues:

• Connect the USB drive to your computer.
• Open This PC or My Computer>Removable Disk.
• Click Properties on the Removable Disk Icon.
• Go to Tools.
• Press Check Now.
• “Automatically fix file system errors” and “Scan for and attempt recovery of bad sectors” are check disk options.
• Two checks.
• Press start. Now scanning begins.
• Finish scanning and click Close.

To repair a USB Flash Drive on Windows 10 or below, follow these steps:

• Connect the USB drive to your computer.
• Click This PC/My Computer>Removable Disk.
• Open Properties by right-clicking the Removable Disk icon.
• Select Tools.
• Click “Rebuild”.
• Let the scan finish. Complete scan process and close the window.
• Right-click the USB flash drive icon and “Eject”. Take the drive out of the USB.

This should fix the issue, but if not, use a professional USB drive data recovery tool to recover corrupt USB flash drive data.

Professional USB flash drive data recovery software can fix most data loss situations. The tool may be downloaded for free and installed on your PC to scan and recover data. BLR data recovery tool for Windows scans big USB devices and recover inaccessible or formatted data with their properties and size intact.

How Does BLR Data Recovery Tool Recover Files From Corrupt USB Flash Drive?

It’s easy to recover vital information, documents, images, and more from a faulty USB flash drive using BLR Data Recovery Tool. Through this DIY program you can easily recover all data from damaged, inaccessible, or formatted USB devices.

You may recover your data by following these steps:

1. Install BLRTools on Windows.

2. Click Next after clicking Everything or selecting data on the ‘Select What to Recover’ page.

3. The screen displays scanned findings. Preview files before restoring.

4. Select files and click Recover.

5. Select drive and press Scan on Recover From.

6. Choose a place to save your data.

Warning: Do not store recoverable data on the same USB drive. Always store this data on a different disk to prevent overwriting.

7. Click Start-saving and wait.

After recovering the data from the corrupt USB flash drive, repair USB drive corrupt due to logic using the following methods:

File Recovery from Physical Issues

Physical errors such damaged connectors, circuit boards, or drive NAND memory chips need hardware replacement or repair. DIY might worsen circumstances. Better consult professionals. Any reputable data recovery provider, like BLR data recovery tool, can recover data from a physically damaged USB device.

Below are solutions to several frequent USB drive physical concerns.

a.) Broken Stems, Connectors, and Dead Drives (no USB power):

Error warnings or problems when connecting the USB are often signs of hardware faults. Common problem messages include “Please Insert Disk into Removable Disk” or “USB Device Not Recognized or Malfunctioned”, “you need to format the disk before using it”, RAW partition, dead or unresponsive drives, and broken controller chips and circuit boards.

Broken silver USB connectors or circuit boards cut USB power. Soldering and circuit repair are needed. If anything goes wrong, you may lose access to your USB and limit or eliminate the probability of data recovery. Managing physical faults requires specific equipment and knowledge. Thus, you should delegate the situation to a specialist.

b. ) “Please Insert Disk into Removable Disk” error:

This error happens when flash drive controller software is faulty. It may also happen with NAND memory difficulties. Low-quality or generic NAND memory chips might generate this issue. Frequent reads and writes damage the drive.

The error suggests NAND memory chip issues. The NAND memory information is likely damaged or deleted, making the disk unreadable. Checking the drive yields the error message “Please insert a disk into Removable Disk”. When checking drive size, it frequently displays 0 MB. As the device cannot be mounted on Windows, Device Manager under Disk drives will display a different USB drive name. Disk Management reveals a No Media drive letter.

If so, look for USB or flash drive data recovery manufacturers.

c. ) Undetecting USB Flash Drive:

It’s possible that the USB port, not the drive itself, is broken. Before you fix the USB file, make sure the USB port works.

Test both USB port & USB drive again after removing it and rebooting. Check if works. One port may be broken but all others operating. Try every computer port. If it fails, try the USB drive on another computer.

Due to USB version constraints, Windows OS may not detect your USB drive.

Repair An Undetected USB Flash Drive With Drive Recognition:

• Select Start>Control Panel>Device Manager.
• Extend the “Disk Drives” list.
• Your USB drive has a downward arrow. Double click and choose “Enable Device“.
• Press Next.
• Again, click ‘Next’.
• Complete by clicking Finish.

After that, assign the drive letter. Do so by following these steps:

• Start>Control Panel>System and Security>Administrative
• Select “Computer Management” under Tools.
• Right-click USB drive. Choose “Change Drive Letter and Paths”.
• Press OK button after ADD.
• Click any accessible drive letter to allocate the USB drive.
• Right-click the USB to make it “Online”.

If this method fail, Windows automatic “Fix it For Me” service may help. Modifying the system registry will assist if this fails. We advise against this choice since it may damage your OS.

The Bottom Line

USB drives may become faulty or unresponsive for logical or physical reasons. After your USB Drive becomes corrupt or unresponsive, you may safely recover corrupt USB flash drive data using a professional USB data recovery program like BLR Tools for Windows.

If you have any questions, leave a comment!