May 17, 2024
recover TrueNAS data

Step-by-Step Instructions on How to Set Up TrueNAS?

Do you need tool that can keep a lot of information? TrueNAS is software for storing that works great for keeping files like photos, videos, music, and papers safe. It also lets you easily share it and access it from different items. We’ve put together guide to help you set up TrueNAS CORE on your device also and how to recover TrueNAS data. You’ll also find out what kind of computer you need to set up TrueNAS CORE .

TrueNAS Installation System Requirements

TrueNAS can work with a lot of different system setups. However, the system needs for running TrueNAS CORE may be different based on your gear setup and what you plan to do with your machine. These needs are:

Processor: You’ll need an AMD x86_64 or an Intel 64-bit processor with two cores.

RAM: Atleast you have to 8GB of RAM for better experience.

Storage: To set up TrueNAS, you need at least two hard drives of the same size or sixteen GB solid-state drives (SSDs).

Networking: You need an Ethernet cable because it doesn’t work with wifi.

There is no way to run TrueNAS on a CD, so you need a DVD or USB stick with at least 1 GB of space.

How Do I Set Up TrueNAS to Recover TrueNAS Data?

At first, installing TrueNAS CORE might seem hard. Here we mentioned all my experience to make your work easier. You will be able to run TrueNAS with little to no trouble. Following steps help you to setup TrueNAS

Step 1: Make a bootable drive or add the installer to a device.

Get a copy of the software and put it on the device you want to use to set up TrueNAS. Then you can start the installation process. There are two following ways mention to do that:

  1. Add it to something.
  2. Make a drive that can start up.

To add the software to a device, you need to get the TrueNAS CORE installation tool and put it on a DVD or USB stick. Next, connect the device to your computer.

To make a working drive, you need to use a tool to copy the setup program to a USB stick and then set up the stick so that it can start up. Most of the time, the second way is faster and easier than adding the software by hand.

Step 2: Turn the computer back on and pick the installation drive as the start drive.

Restart the system after finishing above step.

The choices for installation will show up again. To begin setting up the TrueNAS core, press Enter or click OK.

Then you’ll see the choices for setting up the TrueNAS computer. To start setting up TrueNAS CORE, click Install/Update.

On the next screen, you can see a list of drives that you can set up. Do not choose the file disk, but rather the boot drive. If you’re not sure which one is the boot device, look at how big the disks are. Most of the time, the start device is smaller than the storage disk, so use the arrow keys and Space to get to it.

The alert window will show up. To go ahead, press OK and Yes.

Step 3: Restart to begin the build.

To begin setting up TrueNAS CORE, the next step is to restart the device. Any changes you make to TrueNAS while it’s being set up won’t take effect until you restart it.

So, you need to restart because that’s what will make all the changes you made during the download process. The system will also start up with the new operating system and software.

Step 4: Install the software.

Follow the steps for installing and setting up TrueNAS after restarting the machine.

Now you have to choose whether to boot TrueNAS CORE in UEFI or BIOS. Based on how you set up the software, the system will pick one of the two. For those who don’t know, BIOS works best with earlier hardware and UEFI works best with newer hardware most of the time. The pick will also depend on the operating system and software needs.

It should only take a few minutes for the process to finish.

Step 5: Hard Restart and Remove the Installation Media

A window will pop up telling you to restart the system and remove the installation files when the installation is done. Before taking the software discs out of the system, click OK to restart. Then you’re done.

How to recover TrueNAS data Using Software

There are ways to recover TrueNAS data, but they might not work all the time.

  • How quickly you can recover lost data on TrueNAS CORE rests on a lot of things, like how long ago you lost it, what kind of data it was, and more. Having regular backups is a good way to protect you data.
  • You can, however, use recovery tools from outside sources, such as the BLR NAS recovery tool.
  • This program is simple to use, and it only takes a few steps to get back the lost data on TrueNAS.
  • After the installation is done, open BLR Tools and click the NAS Recovery button under NAS and Linux.
  • BLR Tools will automatically look for NAS drives that are free. Then, pick the TrueNAS device where the data was lost.
  • After you fill in the needed information, TrueNAS will be able to connect to the data recovery tool remotely. Press “Connect.”
  • As soon as the link is made, BLR Tools will begin looking through your TrueNAS for lost or deleted files. From the list of files that were found, pick the ones you want to get back after the check is done.
  • Finally, choose where to save the restored files and click “Recover.”

In the end

TrueNAS CORE is the best storage software to keep all of your files, like photos, music, and papers, safe and easy to get to. It is a base for storage software that can run on different kinds of hardware, like virtual machines and dedicated storage systems. The great thing about the program is that it comes in both free and paid versions.

You can read about what your computer needs to run TrueNAS first, and then follow our easy step-by-step guide on how to set it up. Simply follow the steps for BLR Tools to recover TrueNAS data right away.

Leave a Reply

Your email address will not be published. Required fields are marked *